Beseem Solutions Private Limited

What Are Verderflex Slurry Pumps?

• Technology: These are peristaltic hose pumps — the fluid (slurry) is contained entirely within a flexible hose, which gets periodically compressed by a rotor to move the fluid. 

• Abrasive Resistance: They’re very abrasion resistant. The hose is built to withstand high wear, and hose life doesn’t depend directly on how abrasive the slurry is. 

• High Solids Handling: Some Verderflex hose pumps can handle up to ~80% solid content and slurries with specific gravities (SG) over 

• Pressure & Flow: Depending on the model, they can deliver very high flow rates (for example, up to ~90 m³/h) and pressures up to ~16 bar. 

• Suction Lift: They offer strong self-priming capability, with suction lift up to about 9.5 m water column. 

• Dry Running: These pumps can run dry (i.e., without fluid) without getting damaged. 

• Reversible Operation: The rotor/hose arrangement allows the pump to reverse, which helps clear blockages. 

• Reliable, Low Maintenance: Since only the hose is in contact with the slurry (no internal seals), maintenance is simpler — you only replace the hose.

• Hose Materials: Various hose materials are available (e.g., NR, NBR, EPDM) to suit different slurry chemistries and abrasiveness. 

• Safety: The design can fully contain the hose inside a casing (“disaster-proof hose connection”), reducing risk if a hose fails. 

Key Models / Series

• VF Series: This is their industrial peristaltic hose pump line, built for “difficult media” like slurries, sludge, thickened / viscous fluids.

  • Example: VF125 — very high flow (up to ~90 m³/h), 16 bar. 

  • Maximum particle size for VF125 is around 31.25 mm. 

• Dura Series: More recent hose pump generation, rugged and designed for heavy duty. Mining Technology+1

• Applications: Widely used in mining (e.g. thickener underflow, high-density slurries), water/wastewater, and chemical industries. Mining Technology

Example Verderflex Pumps

Here are a few Verderflex (or similar) pumps — note: not all are “slurry” specific, because detailed slurry-rated units are often quoted / customized for industrial users:

• Verderflex Positive Displacement Pump 99 mL/min — small tube/low-flow pump.

• Verderflex Peristaltic Electric Pump 1.26 L/min (DC) — compact electric pump.

• Verderflex Positive Displacement Pump 375 mL/min — mid-flow rate.

• Verderflex Peristaltic Electric Pump 375 mL/min (24 V) — DC-powered variant.

Advantages of Verderflex Slurry Pumps vs. Traditional Slurry Pumps

• Less Wear & Tear on Mechanical Parts: Only the hose touches the fluid, so no impellers or seal faces to erode quickly.

• Lower Maintenance Cost: Replacing the hose is simpler than repairing internal pump components.

• Better for Very Dense / Abrasive Slurries: Can handle very high solids and coarse particles.

• Reduced Water Usage: In mining, using hose pumps for underflow duties can reduce the amount of dilution water required compared to other pump types. Mining Technology

• Flexible Operation: Dry run, reversible flow, strong suction lift.

Sand mining and dredging is critical to infrastructure development around the globe. It is used in the manufacturing of abrasives, concrete and is mixed with salt to use on icy roads. Sand dredging can extract various minerals that contain useful elements like titanium. Sand mining can also be used in the replacement of eroded coastline.
We offer best River Sand Dredging Pump to lift sand from river.

These pumps feature a rugged construction using the highest quality materials to ensure reliable performance and excellent service life. These pumps are heavy duty and are designed to handle a wide range of slurries and abrasive particles in submersible applications in mining and industry.

Product Description

We are the suppliers of High Chrome alloy Slurry Pumps.

Applications :

• Slurry Pumps are mainly used in Power Plants, steel plants, Plants of Sugar Mills, Fertilizer Plants, Paper Mills, Pharmaceuticals, Refineries.
• Used for Ash or metal slurry Handling / Transfer

Features :

• Bearing Housing Mounted design

• Steady flow

• Energy Efficient

• Sturdy/ rugged Construction

Designed for the highest performance, reliability and low total cost of ownership, slurry pumps are market leaders in mining, quarry and industrial applications.

From horizontal and vertical slurry pumps designed for heavy-duty applications including mill discharge and tailings processing to submersible, dewatering and axial flow pumps, there’s a slurry pump to suit your needs.

When you purchase a slurry pump, you aren’t just getting a heavy-duty product which can handle highly abrasive slurries; you’re gaining access to our global support network of experts, who will work with you to solve your problems and improve your slurry transportation process.

Slurry Pump Manufacturers & Suppliers in India. Our horizontal slurry pump range is widely used in mining, chemical and industrial applications. Our horizontal slurry pumps are designed to work in heavy-duty applications such as Steel Plant, mining plants, sand-processing plant and other specialty applications.

Product Description

We are the suppliers of Hi-Chrome Slurry Pumps.

Applications :

• Slurry Pumps are mainly used in Power Plants, Captive Power Plants of Sugar Mills, Fertilizer Plants, Paper Mills, Pharmaceuticals, Refineries.
• Used for Ash Handling / Transfer

Features :

• Bearing Housing Mounted design

• Steady flow

• Energy Efficient

• Sturdy Construction

• We are the suppliers of Slurry Pumps.

BEHP Brand Industrial Centrifugal Pumps & Spare Parts

We proudly supply BEHP brand industrial centrifugal pumps, known for their durability, efficiency, and performance in handling abrasive and corrosive fluids. These pumps are widely used across mining, slurry handling, wastewater treatment, and industrial dewatering applications due to their robust construction and reliable operation under demanding conditions.

In addition to complete pump units, we also offer a comprehensive range of spare parts for BEHP pumps. Our inventory includes Hi-Chrome alloy and rubber-lined components, manufactured to meet high wear-resistance standards and ensure extended service life in abrasive environments.

🔩 BEHP Pump Spares – Equivalent to Weir Minerals & Metso

Our BEHP spares are designed to be fully compatible and equivalent in quality and performance to those used in Weir Minerals (Warman) and Metso slurry pumps. These spares offer a cost-effective, reliable alternative without compromising on durability or fit.

Available Spare Parts Include:

• Impellers (Hi-Chrome / Rubber-lined)

• Volute liners and casings

• Throat bushes

• Shaft sleeves

• Expeller rings and expellers

• Bearing assemblies and seals

• Back liners and front liners

⚙️ Materials Offered

• Hi-Chrome (High Chromium Alloy):
  Ideal for severe slurry and high-abrasion applications, offering superior wear resistance and extended service life.

• Rubber Lined Components:
  Suitable for handling corrosive and fine particle slurries, providing excellent chemical resistance and shock absorption.

Sand slurry and ash handling pumps are heavy-duty centrifugal pumps designed to transport abrasive, high-density slurries and ash mixtures in industrial environments. These pumps are built to withstand extreme wear and tear from solid particles such as sand, coal ash, cinder, and other abrasive media.

Key Features:

• Robust Construction: Cast steel, high-chrome alloy, or wear-resistant materials for long service life in abrasive conditions.

• Heavy-Duty Impellers: Specially shaped impellers to handle high solid content without clogging.

• Thick Wear Liners: Protect casing and pump internals from erosion and abrasion.

• High Efficiency Design: Ensures reliable performance with minimized energy consumption.

• Back Pull-Out Design: Allows easy maintenance without disturbing pipework.

• Sealing Options: Mechanical seals or packing glands designed for abrasive slurry service.

Applications:

• Mining (sand, ore slurries)

• Power plants (ash handling, fly ash transport)

• Steel and foundry industries (slag and abrasive mixtures)

• Tunneling and dredging operations

• Construction (cement, sand transport)

Performance Characteristics:

• Capable of handling high solid concentration slurries

• Operates under high pressure

• Designed for continuous duty in severe service conditions

We are offering Screw Pumps to our client.

Triple Screw Pumps are positive displacement pumps of very simple design. They consist of three rotating parts only “the rotors” which turn in their precisely machined housing bores. The rotors are of double start screws, continuously meshing to form delivery Chambers, which move constantly from the suction to the pressure / discharge side. Constant volume of the chambers and the uniformity of the movement allow an even flow. The pumps remain therefore near silent in operation and almost free of pulsation, even at high speed. The Principle of screw pump and its accurate profiles warrant high suction power. Axial loads on the rotor are compensates by adequate design of the bearing part. All the radial loads are self-compensated.

APPLICATION

Triple Screw Pumps, type TH are used for the transfer of fluids with lubricating properties, as well as for generating pressure in hydraulic units or overcoming pressure in the hydraulic circuits. Main Industrial uses are in :

• Power Hydraulics
• Industries
• Oil & Gas
• Marine
• Power Generation
• Machine Tools
• Compressor Lubrication
• Filtrations
• Lube
• Windmill
• Presses

This rubber lined slurry pump for any type of abrasive liquid transfer. The Working Principle of a slurry pump is that slurry enters the pump through the eye of the rotating impeller which imparts a circular motion. The slurry is forced outwards by centrifugal force and moves between the blades of the impeller.

Image created • Pump parts arrangement on reflective surfaceShareshow casing liner and wear plate imageImage created • Centrifugal pump components: casing liner and wear plateSharesplit the liner from casingImage created • Casing liner and casing componentsShareimpeller imageImage created • Close-up of a metallic impellerSharedescription of weir mineral pumps equivalent spares.

Here’s a clear, practical description of equivalent spare parts typically used for Weir Minerals (Warman) slurry pumps and suitable interchange (aftermarket) parts you can request or stock:

1. Impellers

• The rotating part that pushes slurry through the pump.

• Can be metal (high-chrome white iron) or rubber/elastomer type depending on slurry abrasiveness.

• Metal impellers are common for highly abrasive, coarse slurries; rubber for fine, non-sharp solids.

2. Liners & Wear Plates

• Volute liner / casing liner: Wear-resistant replaceable lining inside the casing.

• Frame plate liner / wear plate: Protects stationary pump housing from slurry erosion.

• Materials: hard metal alloys (e.g., high-chrome) or rubber/elastomer.

3. Throat Bush / Suction Liner

• Sleeve fitted at the suction eye to protect against heavy wear.

• Often made of high-chrome iron or rubber depending on the application.

4. Shaft Sleeve

• A corrosion- and abrasion-resistant sleeve protecting the pump shaft where seals sit.

• Typically stainless steel or hard plated materials.

5. Seals & Packing

• Mechanical seals / gland packing / lantern rings / expeller and expeller rings:
  These form the sealing system around the shaft to stop slurry leakage.

• Materials vary (rubber, elastomer, stainless steel, etc.).

6. Bearings & Bearing Assembly

• Heavy-duty, oil-lubricated roller or taper bearings with housing.

• Critical for shaft alignment, reducing vibration and bearing wear.

7. Fasteners & Misc Mechanical Parts

• Bolts, studs, O-rings, spacers, casing covers, shaft collars, etc.—these support assembly and wear part fit-up.