Call 08047631439 87% Response Rate

our range

Industrial Pumps

All the pump used in factory can cover by industrial pumps.
  • SS Electric Submersible Dewatering Pump
  • SS Electric Submersible Dewatering Pump
  • SS Electric Submersible Dewatering Pump
SS Electric Submersible Dewatering Pump

SS Electric Submersible Dewatering Pump

Rs 25,000  / PieceGet Best Price

Product Brochure

Motor PhaseThree Phase
Usage/ApplicationDewatering
Power SourceElectric
Voltage220 V
MaterialCast Iron
Frequency50 Hz
Outlet Diameter50 mm
Motor100% Copper wire
Maximum Flow4200 LPM
Handling Capacity12 mm
Country of OriginMade in India
Details:
  • Product available as per the customer requirement
  • Our product is highly appreciated by customers

View Complete details

get quote request a call back
  • Thermic Fluid Pump
  • Thermic Fluid Pump
  • Thermic Fluid Pump
  • Thermic Fluid Pump
  • Thermic Fluid Pump
  • Thermic Fluid Pump
Thermic Fluid Pump

Thermic Fluid Pump

Rs 60,000  / PieceGet Best Price

Product Brochure

Head100m
BrandBeseem
MaterialCast Iron
Capacity250 m3/hr
Operating Temperature350 Degree C
Working Pressure20 bar

According to the different desires of our customers, we present them a desirable range of Thermic Fluid Pump. Our Thermic Fluid Pump is easy to install and efficient to perform its functions. Also, our Thermic Fluid Pump is rigidly fabricated as per the set industrial standards and norms.

Features:

  • Durable
  • Standard quality
  • Low maintenance cost

View Complete details

get quote request a call back
  • End Suction Centrifugal Pump
  • End Suction Centrifugal Pump
  • End Suction Centrifugal Pump
End Suction Centrifugal Pump

End Suction Centrifugal Pump

Rs 40,000  / PieceGet Best Price

Product Brochure

Motor Horsepower200 HP
BrandBEHP
Motor PhaseThree Phase
Pump TypeHorizontal
MaterialCast Iron
Power SourceElectric
Maximum Discharge Flow6000 Lit/hr
Automation GradeAutomatic
Operating Temperature350 Degree C
Details:
  • Our product is highly appreciated by the customers all over the india for the quality of the product.

View Complete details

get quote request a call back
  • Sewage Submersible Pump
  • Sewage Submersible Pump
  • Sewage Submersible Pump
  • Sewage Submersible Pump
  • Sewage Submersible Pump
  • Sewage Submersible Pump
Sewage Submersible Pump

Sewage Submersible Pump

Rs 30,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Motor Horsepower2-5 HP
Power2 HP
Discharge Range60-100 LPM
Number Of StagesSingle-stage Pump
TypeElectric
Motor PhaseThree Phase
HeadLess than 15 m
Maximum Discharge FlowLess than 100 LPM
This pumps is use for any type sewage application. This pumps main CI moc with side discharge flange type delivery. IIts very handy and alluminium alloy casing is also available.

Additional Information:

  • Production Capacity: 50 m3/hr
  • Delivery Time: 1-2 weeks

View Complete details

get quote request a call back
  • Horizontal Split Case Pump
  • Horizontal Split Case Pump
  • Horizontal Split Case Pump
  • Horizontal Split Case Pump
  • Horizontal Split Case Pump
Horizontal Split Case Pump

Horizontal Split Case Pump

Rs 1 Lakh  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Flow Rate501- 1000 m3 /hr
Usage/ApplicationIndustrial
Speed1440
Power SourceElectric
MaterialCast Iron
Max Flow Rate4500 m3/h
BrandBEHP
Head150m
Maximum Temperature90 Degree C
Frequency50 Hz
Voltage440 V
Offered products are developed making use of finest quality material. These products are widely applauded by our customers for user-friendly, excellent functionality, and longer service life. 

View Complete details

get quote request a call back
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
  • Submersible Sludge Pumps
Submersible Sludge Pumps

Submersible Sludge Pumps

Rs 25,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Power2 HP
Motor Horsepower2-30 HP
Number Of StagesSingle
Usage/ApplicationSludge Suction
TypeElectric
Motor PhaseThree Phase
HeadLess than 15 m
BrandBEHP
MaterialCI or SS
Temperature40 deg cel
Speed1450 / 2900
Solid Size20 mm round
Maximum Flow Rate5000 Lit/min
SUBMERSIBLE SEWAGE PUMPS FOR ALL TYPES OF SEWAGE APPLICATION
It is designed to handle major heavy duty sludge applications across a very wide range. The excellent Solid handling capability of our channel-impeller pumps guarantees maximum operating time and substantial reductions in maintenance costs caused by pump jamming or clogging and perform very efficient operation.

Additional Information:

  • Delivery Time: 2-4 weeks

View Complete details

get quote request a call back
  • Paper Pulp Pump
  • Paper Pulp Pump
  • Paper Pulp Pump
Paper Pulp Pump

Paper Pulp Pump

Rs 90,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Usage/Applicationpaper pulp or paper stock in paper industries
Motor Horsepower5-20 HP
StagesSingle Stage
Pump Typesingle stage end suction back pull out
Product TypeHorizontal semi open impeller
MaterialCI with SS
Application/UsageFor Textile & Paper Industry
Body MaterialCast Iron
BrandBEHP
Motor PhaseThree Phase
FinishingPaint Coated
Fuel TypeElectricity
Frequency50 Hz
Voltage440 V
Cooling MethodAir cooled
We are offering Paper Pulp Pump to our client. Large inspection holes facilitate a quick and easy removal of any clogging. Special impeller types are fitted which match the type of pulp and the pump application. These include open impellers, which can be combined with a side channel impeller if the pulp is hard to pump, and free-flow impellers (also see Torque flow pump). 

Free-flow impellers are used if the pulps to be pumped (also see Pulp pumping) are contaminated or if the mixing effect of the free-flow impeller creating a vortex is advantageous for a particular process.



Additional Information:

  • Delivery Time: 2-4 weeks
  • Packaging Details: wooden pack

View Complete details

get quote request a call back
  • Hot Water Pump
  • Hot Water Pump
  • Hot Water Pump
Hot Water Pump

Hot Water Pump

Rs 20,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Power5 HP
Max Flowrate>60 LPM
Power SourceElectric
Motor PhaseThree Phase
Automation GradeSemi-Automatic
MaterialSS
Pump TypeCentrifugal Pump
Temperature-20 to 350 degree
This is hot water pumps used for condensate, hot oil, hot liquid transfer. The pump moc is cast ss & ss sheet metal, high temperature mechanical seal. Its available in monoblock also.

Additional Information:

  • Delivery Time: 1 week

View Complete details

get quote request a call back
  • Stainless Steel Drainage Pumps
  • Stainless Steel Drainage Pumps
  • Stainless Steel Drainage Pumps
  • Stainless Steel Drainage Pumps
  • Stainless Steel Drainage Pumps
  • Stainless Steel Drainage Pumps
Stainless Steel Drainage Pumps

Stainless Steel Drainage Pumps

Rs 20,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Max Flow RateUpto 500 LPM
Power4 HP
Head10 m
MaterialCI
Liquid Temp50 deg cel.
The pump shaft shall be made of stainless steel as per ASTM A582 and grade of AISI 410. The Pump shall be supplied with mechanical shaft seal with material of construction of Carbon/Ceramic/NBR/AISI 304.

The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, rubber sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, 1 phase, 240 volts, 3 phase, 415 volts.

Additional Information:

  • Delivery Time: 2-4 weeks

View Complete details

get quote request a call back
Triple Screw Pump

Triple Screw Pump

Rs 1 Lakh  / PieceGet Best Price
Flow Rate51-100 LPM
MaterialStainless Steel
Head100 m
Frequency50 Hz
Voltage415 V
Usage/ApplicationIndustrial
PhaseThree Phase
Power SourceElectric
Temperature130 Degree C
Country of OriginMade in India
Triple Screw Pumps are positive displacement pumps of very simple design. They consist of three rotating parts only “the rotors” which turn in their precisely machined housing bores. The rotors are of double start screws, continuously meshing to form delivery Chambers, which move constantly from the suction to the pressure / discharge side. Constant volume of the chambers and the uniformity of the movement allow an even flow. The pumps remain therefore near silent in operation and almost free of pulsation, even at high speed. The Principle of screw pump and its accurate profiles warrant high suction power. Axial loads on the rotor are compensates by adequate design of the bearing part. All the radial loads are self-compensated.

APPLICATION

Triple Screw Pumps, type TH are used for the transfer of fluids with lubricating properties, as well as for generating pressure in hydraulic units or overcoming pressure in the hydraulic circuits. Main Industrial uses are in :

  • Power Hydraulics
  • Industries
  • Oil & Gas
  • Marine
  • Power Generation
  • Machine Tools
  • Compressor Lubrication
  • Filtrations
  • Lube
  • Windmill
  • Presses

View Complete details

get quote request a call back
Vertical Inline Pump

Vertical Inline Pump

Rs 45,000  / PieceGet Best Price
Head100m
Voltage340 V
BrandBEHP
Maximum Discharge Flow1000m3/hr
Motor Horsepower500 HP
PhaseThree Phase
Flow1000m3/hr
Warranty12 Months
Frequency50/60 Hz
Pump Typeinline booster pumps, Peripheral Inline Booster
Automation GradeManual
We are offering Inline Pump to our client for boosting pressure in long distance pipeline in Indutrial application.


Additional Information:

  • Pay Mode Terms: Other
  • Production Capacity: 5-200 m3/hr at head range 50-5 m
  • Delivery Time: 4-6 weeks

View Complete details

get quote request a call back
  • Centrifugal Process Pump
  • Centrifugal Process Pump
  • Centrifugal Process Pump
  • Centrifugal Process Pump
Centrifugal Process Pump

Centrifugal Process Pump

Rs 30,000  / PieceGet Best Price

Product Brochure

Motor Horsepower30 HP
BrandBEHP
StagesSingle Stage
Motor PhaseThree Phase
Pump TypeCentrifugal
MaterialCast Iron
Type Of End UseIndustrial
We are engaged in wholesaler, and trader to our clients three phase Centrifugal Pumps for industrial use only. 

View Complete details

get quote request a call back
  • Three Phase Bare Pump
  • Three Phase Bare Pump
  • Three Phase Bare Pump
  • Three Phase Bare Pump
Three Phase Bare Pump

Three Phase Bare Pump

Rs 40,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Power>10 HP
Head15-20 m
Motor PhaseThree Phase
Usage/ApplicationIndustrial
MaterialSteel
BrandBEHP
This pumps is centrifugel end suction back pull out pump, used in any type of industrial application. Its ss / CI in construction and single & multistage in design.Bare Shaft Pump design can be used in any area of industry where a great variety of different substances must be pumped or very precisely dosed. The Bare Shaft Metal Pump with square/rectangular hopper and coupling rod with feeding screw and force-feed chamber is employed in almost all branches of industry to provide continuous, pressure-stable, gentle and low-pulsation conveyance.

Features:
Minimal noise level

  • Low energy consumption
  • High resistance to abrasion and corrosion
  • Ability to pump wide range of fluid viscosities
  • Simple installation, operation and maintenance
  • Product remains unchanged during pumping process
  • Simple operation as the single helical rotor rotates inside the double helical, elastomer-lined stator
  • The rotor rotates eccentrically in the stator through a series of sealed cavities for 180 degrees therefore progressing the medium from the intake to the discharge end of the assembly
  • The volumetric efficiency is directly proportional to the number of rotations of the pump to the size of the cavity formed between the rotor and stator
  • Another captivity is created after one is diminished at the same rate resulting in a constant non-pulsating flow


Additional Information:

  • Production Capacity: 3-100 m3/hr
  • Delivery Time: 2-4 weeks

View Complete details

get quote request a call back
  • Ksb Centrifugal Pumps
  • Ksb Centrifugal Pumps
  • Ksb Centrifugal Pumps
  • Ksb Centrifugal Pumps
Ksb Centrifugal Pumps

Ksb Centrifugal Pumps

Rs 45,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Motor Horsepower>20 HP
StagesTwo Stage
Motor PhaseThree Phase
MaterialCast Iron
Application/UsageFor Textile & Paper Industry
Pump TypeEnd suction
Maximum Head40 m
Maximum Discharge Flow200 m3/hr

Centrifugal pumps are used in the petrochemical, food processing and chemical industries as well as in off-site applications of refineries and in high-temperature heating systems. They pump hot, cold, aggressive, volatile, explosive, toxic, contaminated and especially valuable liquids.



Additional Information:

  • Delivery Time: 2-4 weeks

View Complete details

get quote request a call back
  • End Suction Close Coupled Pump
  • End Suction Close Coupled Pump
  • End Suction Close Coupled Pump
End Suction Close Coupled Pump

End Suction Close Coupled Pump

Rs 50,000  / NumberGet Best Price

Minimum Order Quantity: 2 Number

StagesSingle Stage
BrandBEHP
MaterialStainless Steel or CI
Frequency50 Hz
Cooling MethodAir Cooled
Voltage380-440 V
Material GradeSS304/SS316
Delivery Head Max60m
Flow Range70 m3/hr
We are offering Couple SS Pump to our client. Close-coupled pumps are characterised by a common motor and pump shaft or by their motor shaft and pump shaft being rigidly connected in a pump casing. The pump casing is bolted to the drive flange rather than being installed on pump feet.

View Complete details

get quote request a call back
High Temperature Pumps

High Temperature Pumps

Rs 50,000  / PieceGet Best Price
Max Flow Rate20 m3/hr
Head10-100
BrandBEHP
MaterialStainless steel
ApplicationTransfer high temprature oil, chemicals and water
Pump TypeHorizontal end Suction
Heat transfer oil plants are used to indirectly temper processes in production. In these plants, a fluid – such as thermal oil –  is utilized to transfer heat. The thermal oil makes it possible to heat or to cool objects or substances during a process. Unlike the use of water as a heat transfer medium, thermal oil can be used to guarantee system operation up to 350°C, even without pressure. In addition, there is neither corrosion nor the danger that the plant could freeze in an outdoor installation.

The heat transfer technology comprises together with the heat transfer oils a very wide range of production processes. The oils are on a mineral or synthetic basis, and can be heated up to 450°C. At such high temperatures, this happens at a pressure of about 12 bar. Typical applications for the canned motor pump include circulation pump the chemical, petrochemical, refinery and energy utilities. Thus, the pump forms the core of a single heat transfer circuit, which is used for indirect temperature control.

View Complete details

get quote request a call back
  • Industrial Ro Pump
  • Industrial Ro Pump
  • Industrial Ro Pump
Industrial Ro Pump

Industrial Ro Pump

Rs 30,000  / PieceGet Best Price

Product Brochure

CapacityUpto 50 m3/hr
Power>10 HP
Usage/ApplicationIndustrial
Head150 Meter
MaterialStainless Steel
Frequency50 Hz
Voltage440 V
Details:
  • Our product is highly appreciated by the customers all over the india for the quality of the product.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES